|
HD6432633 Datasheet, PDF (305/1453 Pages) Renesas Technology Corp – Series of Microcomputers (MCUs: microcomputer units) | |||
|
◁ |
Bit 7âData Transfer Size (DTSZ): Selects the size of data to be transferred at one time.
Bit 7
DTSZ
0
1
Description
Byte-size transfer
Word-size transfer
(Initial value)
Bit 6âData Transfer Increment/Decrement (DTID): Selects incrementing or decrementing of
MAR every data transfer in sequential mode or repeat mode.
In idle mode, MAR is neither incremented nor decremented.
Bit 6
DTID
0
1
Description
MAR is incremented after a data transfer
⢠When DTSZ = 0, MAR is incremented by 1 after a transfer
⢠When DTSZ = 1, MAR is incremented by 2 after a transfer
MAR is decremented after a data transfer
⢠When DTSZ = 0, MAR is decremented by 1 after a transfer
⢠When DTSZ = 1, MAR is decremented by 2 after a transfer
(Initial value)
Bit 5âRepeat Enable (RPE): Used in combination with the DTIE bit in DMABCR to select the
mode (sequential, idle, or repeat) in which transfer is to be performed.
Bit 5
RPE
0
1
DMABCR
DTIE
Description
0
Transfer in sequential mode (no transfer end interrupt)
1
Transfer in sequential mode (with transfer end interrupt)
0
Transfer in repeat mode (no transfer end interrupt)
1
Transfer in idle mode (with transfer end interrupt)
(Initial value)
For details of operation in sequential, idle, and repeat mode, see section 8.5.2, Sequential Mode,
section 8.5.3, Idle Mode, and section 8.5.4, Repeat Mode.
Bit 4âData Transfer Direction (DTDIR): Used in combination with the SAE bit in DMABCR
to specify the data transfer direction (source or destination). The function of this bit is therefore
different in dual address mode and single address mode.
251
|
▷ |