English
Language : 

HD6417750 Datasheet, PDF (755/1039 Pages) Renesas Technology Corp – SuperH RISC engine
Section 17 Smart Card Interface
17.1 Overview
The subset of the IC card (smart card) interface conforming to ISO/IEC7816-3 (Identification
Card) is supported as a serial communication interface (SCI) extension function.
Switching between the normal serial communication interface and the smart card interface is
carried out by means of a register setting.
17.1.1 Features
Features of the smart card interface are listed below.
• Asynchronous mode
 Data length: 8 bits
 Parity bit generation and checking
 Transmission of error signal (parity error) in receive mode
 Error signal detection and automatic data retransmission in transmit mode
 Direct convention and inverse convention both supported
• On-chip baud rate generator allows any bit rate to be selected
• Three interrupt sources
There are three interrupt sources—transmit-data-empty, receive-data-full, and transmit/receive
error—that can issue requests independently.
The transmit-data-empty interrupt and receive-data-full interrupt can activate the DMA
controller (DMAC) to execute data transfer.
Rev. 6.0, 07/02, page 703 of 986