HD6417750 Datasheet, PDF (305/1039 Pages) Renesas Technology Corp – SuperH RISC engine

10.3 Clock Operating Modes
Tables 10.3 (1) and 10.3 (2) show the clock operating modes corresponding to various
combinations of mode control pin (MD2–MD0) settings (initial settings such as the frequency
division ratio).
Table 10.4 shows FRQCR settings and internal clock frequencies.
Table 10.3 (1) Clock Operating Modes (SH7750, SH7750S)
External
Pin Combination
Frequency
(vs. Input Clock)
Clock
Operating
Mode
1/2
Frequency
MD2 MD1 MD0 Divider
Peripheral
CPU Bus Module
PLL1 PLL2 Clock Clock Clock
FRQCR
Initial Value
0
0
0
0
Off
On On 6
3/2 3/2
H'0E1A
1
1
Off
On On 6
1
1
H'0E23
2
1
0
On
On On 3
1
1/2
H'0E13
3
1
Off
On On 6
2
1
H'0E13
4
1
0
0
On
On On 3
3/2 3/4
H'0E0A
5
1
Off
On On 6
3
3/2
H'0E0A
Notes: 1. Turning on/off of the ½ frequency divider is solely determined by the clock operating
mode.
2. For the ranges of input clock frequency, see the descriptions of the EXTAL clock input
frequency (f_EX) and CKIO clock output (f_OP) in section 22.3.1, Clock and Control Signal
Timing.
Table 10.3 (2) Clock Operating Modes (SH7750R)
Clock
Operating
Mode
External
Pin Combination
MD2 MD1 MD0
PLL1
CPU
PLL2 Clock
Frequency
(vs. Input Clock)
Bus Peripheral
Clock Module Clock
FRQCR
Initial Value
0
0
0
0
On (×12) On 12
3
3
H'0E1A
1
1
On (×12) On 12
3/2
3/2
H'0E2C
2
1
0
On (×6) On 6
2
1
H'0E13
3
1
On (×12) On 12
4
2
H'0E13
4
1
0
0
On (×6) On 6
3
3/2
H'0E0A
5
1
On (×12) On 12
6
3
H'0E0A
6
1
0
Off (×6) Off 1
1/2
1/2
H'0808
Notes: 1. The multiplication factor of PLL 1 is solely determined by the clock operating mode.
2. For the ranges of input clock frequency, see the descriptions of the EXTAL clock input
frequency (f ) and CKIO clock output (f ) in section 22.3.1, Clock and Control Signal
EX
OP
Timing.
Rev. 6.0, 07/02, page 253 of 986