SAM4L Datasheet, PDF (944/1185 Pages) ATMEL Corporation – ATSAM ARM-based Flash MCU

ATSAM4L4/L2
34.8
Module Configuration
The specific configuration for each CATB instance is listed in the following tables.The module
bus clocks listed here are connected to the system bus clocks. Refer to Section 10. ”Power Man-
ager (PM)” on page 102 for details.
Table 34-4. CATB Configuration
Feature
Number of sensors/connected pins
Number of status bits in STATUSSEL
Number of fractional bits implemented in IDLE, LEVEL,
TIMING, and THRESH.
Number of available bits in the PINSEL register
CATB
32
32
10
5
Table 34-5. CATB Clocks
Clock Name
CLK_CATB
RC Oscillator
GCLK
Description
Clock for the CATB bus interface
Source clock for the CLK_ACQ
Source clock for the CLK_ACQ. The
generic clock used for the CATB is
GCLK3
Table 34-6. Register Reset Values
Register
VERSION
PARAMETER
Reset Value
0x00000100
0x000A2020
42023C–SAM–02/2013
944