|
SAM4L Datasheet, PDF (184/1185 Pages) ATMEL Corporation – ATSAM ARM-based Flash MCU | |||
|
◁ |
12.7.15 1MHz RC Clock Configuration Register
Name:
Access Type:
Reset Value:
RC1MCR
Read/Write
-
ATSAM4L4/L2
31
30
29
28
27
26
25
24
-
-
-
-
-
-
-
-
23
22
21
20
19
18
17
16
-
-
-
-
-
-
-
-
15
14
13
12
11
10
9
8
-
-
-
CLKCAL[4:0]
7
6
5
4
3
2
1
0
FCD
-
-
-
-
-
-
CLKOEN
⢠CLKCAL: 1MHz RC Osc Calibration
Calibration field of the internal RC oscillator.
⢠CLKOEN: 1MHz RC Osc Clock Output Enable
0: The 1MHz RC oscillator is not output.
1: The 1MHz RC oscillator is output, available as a logic clock.
⢠FCD: Flash Calibration Done
This bit is set to 1 when the CLKCAL field has been loaded by the flash fuses after a reset (read only).
0: The flash calibration will be redone after any reset.
1: The flash calibration will only be redone after a power-on reset (POR18).
Note that this register is protected by a lock. To write to this register the UNLOCK register has to be written first. Refer to
Section 12.7.7 âUnlock Registerâ on page 173 for details.
42023CâSAMâ02/2013
184
|
▷ |