SAM4L Datasheet, PDF (821/1185 Pages) ATMEL Corporation – ATSAM ARM-based Flash MCU

• CPCSTOP: Counter Clock Stopped with RC Compare
1: Counter clock is stopped when counter reaches RC.
0: Counter clock is not stopped when counter reaches RC.
• BURST: Burst Signal Selection
BURST
0
1
2
3
Burst Signal Selection
The clock is not gated by an external signal.
XC0 is ANDed with the selected clock.
XC1 is ANDed with the selected clock.
XC2 is ANDed with the selected clock.
• CLKI: Clock Invert
1: Counter is incremented on falling edge of the clock.
0: Counter is incremented on rising edge of the clock.
• TCCLKS: Clock Selection
TCCLKS
0
1
2
3
4
5
6
7
Clock Selected
TIMER_CLOCK1
TIMER_CLOCK2
TIMER_CLOCK3
TIMER_CLOCK4
TIMER_CLOCK5
XC0
XC1
XC2
ATSAM4L4/L2
42023C–SAM–02/2013
821