English
Language : 

SAM4L Datasheet, PDF (258/1185 Pages) ATMEL Corporation – ATSAM ARM-based Flash MCU
ATSAM4L4/L2
and that CLK_FLASHCALW_APB is not turned off before accessing the FLASHCALW configu-
ration and control registers. Failing to do so may deadlock the bus.
14.4.3 Interrupts
The FLASHCALW interrupt request lines are connected to the NVIC. Using the FLASHCALW
interrupts requires that it is programmed first.
14.4.4
Debug Operation
When an external debugger forces the CPU into debug mode, the FLASHCALW continues nor-
mal operation. If the FLASHCALW is configured in a way that requires it to be periodically
serviced by the CPU through interrupts or similar, improper operation or data loss may result
during debugging.
42023C–SAM–02/2013
258