SAM4L Datasheet, PDF (933/1185 Pages) ATMEL Corporation – ATSAM ARM-based Flash MCU

34.7.10 Interrupt Status Register
Name:
ISR
Access Type:
Read-only
Offset:
0x24
Reset Value:
0x00000000
ATSAM4L4/L2
31
30
29
28
27
26
25
24
-
-
-
-
-
-
-
-
23
22
21
20
19
18
17
16
-
-
-
-
-
-
-
-
15
14
13
12
11
10
9
8
-
-
-
-
-
-
-
-
7
6
5
4
3
2
1
0
-
-
-
-
-
OUTTCH
INTCH
SAMPLE
Bits in this register are cleared by writing a one to the corresponding bit in the Status Clear Register (SCR).
• OUTTCH: Out-of-Touch
0: No out-of-touch event detected.
1: Out-of-touch event detected.
• INTCH: In-touch
0: No in-touch event detected.
1: In-touch event detected.
• SAMPLE: Sample Ready
0: No new measurement sample ready since last write to IDR.SAMPLE.
1: New measurement sample ready since last write to SCR.SAMPLE. The values in the LEVEL, RAW, and IDLE registers have
been updated.
42023C–SAM–02/2013
933