SAM4L Datasheet, PDF (843/1185 Pages) ATMEL Corporation – ATSAM ARM-based Flash MCU

ATSAM4L4/L2
31.5.4 Interrupts
PEVC can generate an interrupt request in case of trigger generation or trigger overrun. The
PEVC interrupt request lines are connected to the NVIC. Using the PEVC interrupts requires the
NVIC to be programmed first.
31.5.5
Debug Operation
PEVC is not frozen during debug operation when the Core is halted, unless the bit correspond-
ing to the PEVC is set in the Peripheral Debug Register (PDBG). Refer to the On-Chip Debug
chapter for details.
42023C–SAM–02/2013
843