SAM4L Datasheet, PDF (1114/1185 Pages) ATMEL Corporation – ATSAM ARM-based Flash MCU

ATSAM4L4/L2
42.4.3
Peripheral Power Consumption in Power Scaling mode 0 and 2
The values in Table 42-8 are measured values of power consumption under the following
conditions:
• Operating conditions, internal core supply (Figure 42-2)
– V_VDDIN = 3.3V
– V_VDDCORE supplied by the internal regulator in switching mode
• TA = 25°C
• Oscillators
– OSC0 (crystal oscillator) stopped
– OSC32K (32KHz crystal oscillator) running with external 32KHz crystal
– DFLL running at 48MHz with OSC32K as reference clock
• Clocks
– DFLL used as main clock source
– CPU, AHB, and PB clocks undivided
• I/Os are inactive with internal pull-up
• Flash enabled in high speed mode
• CPU in SLEEP0 mode
• BOD18 and BOD33 disabled
Consumption active is the added current consumption when the module clock is turned on.
42023C–SAM–02/2013
1114