|
SAM4L Datasheet, PDF (125/1185 Pages) ATMEL Corporation – ATSAM ARM-based Flash MCU | |||
|
◁ |
ATSAM4L4/L2
⢠VREGRCMASK: VREG Request Clock Mask
0: VREG Request Clock is disabled
1: VREG Request Clock is enabled
⢠ADCIFERCMASK: ADCIFE Request Clock Mask
0: ADCIFE Request Clock is disabled
1: ADCIFE Request Clock is enabled
⢠PEVCRCMASK: PEVC Request Clock Mask
0: PEVC Request Clock is disabled
1: PEVC Request Clock is enabled
⢠TWIS1RCMASK: TWIS1 Request Clock Mask
0: TWIS1 Request Clock is disabled
1: TWIS1 Request Clock is enabled
⢠TWIS0RCMASK: TWIS0 Request Clock Mask
0: TWIS0 Request Clock is disabled
1: TWIS0 Request Clock is enabled
⢠ASTRCMASK: AST Request Clock Mask
0: AST Request Clock is disabled
1: AST Request Clock is enabled
⢠ACIFCRCMASK: ACIFC Request Clock Mask
0: ACIFC Request Clock is disabled
1: ACIFC Request Clock is enabled
⢠CATBRCMASK: CAT Request Clock Mask
0: CAT Request Clock is disabled
1: CAT Request Clock is enabled
⢠RSTPUN: Reset Pullup
0: Pullup on the external reset pin is disabled.
1: Pullup on the external reset pin is enabled.
Note that this register is protected by a lock. To write to this register the UNLOCK register has to be written first. Refer to
Section 10.7.7 âPM Unlock Registerâ on page 117 for details.
42023CâSAMâ02/2013
125
|
▷ |