SAM4L Datasheet, PDF (319/1185 Pages) ATMEL Corporation – ATSAM ARM-based Flash MCU

16.6.5 Peripheral Select Register
Name:
PSR
Access Type:
Read/Write
Offset:
0x004 + n*0x040
Reset Value:
-
ATSAM4L4/L2
31
30
29
28
27
26
25
24
-
-
-
-
-
-
-
-
23
22
21
20
19
18
17
16
-
-
-
-
-
-
-
-
15
14
13
12
11
10
9
8
-
-
-
-
-
-
-
-
7
6
5
4
3
2
1
0
PID
• PID: Peripheral Identifier
The Peripheral Identifier selects which peripheral should be connected to the DMA channel. Writing a PID will select both which
handshake interface to use, the direction of the transfer and also the address of the Receive/Transfer Holding Register for the
peripheral. See the Module Configuration section of PDCA for details. The width of the PID field is device specific and
dependent on the number of peripheral modules in the device.
42023C–SAM–02/2013
319