SAM4L Datasheet, PDF (754/1185 Pages) ATMEL Corporation – ATSAM ARM-based Flash MCU

Writing a one to this bit resets the TWIS.
• STREN: Clock Stretch Enable
0: Disables clock stretching if RHR/THR buffer full/empty. May cause over/underrun.
1: Enables clock stretching if RHR/THR buffer full/empty.
• GCMATCH: General Call Address Match
0: Causes the TWIS not to acknowledge the General Call Address.
1: Causes the TWIS to acknowledge the General Call Address.
• SMATCH: Slave Address Match
0: Causes the TWIS not to acknowledge the Slave Address.
1: Causes the TWIS to acknowledge the Slave Address.
• SMEN: SMBus Mode Enable
0: Disables SMBus mode.
1: Enables SMBus mode.
• SEN: Slave Enable
0: Disables the slave interface.
1: Enables the slave interface.
ATSAM4L4/L2
42023C–SAM–02/2013
754