HD64F38602R Datasheet, PDF (7/552 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer

Notes:
When using an on-chip emulator (E7) for H8/38602R program development and debugging, the
following restrictions must be noted.
1. The NMI pin is reserved for the E7, and cannot be used.
2. Area H'4000 to H'4FFF should not be accessed.
3. Area H'F780 to H'FB7F should not be accessed.
4. When the E7 is used, NMI is an input/output pin (open-drain in output mode).
5. When on-board programming/erasing is performed in boot mode, the SCI3 (P31/RXD3 and
P32/TXD3) is used.
6. When the on-chip emulator is used, even though the on-chip oscillator is selected, connect a
resonator to OSC1 and OSC2 or input an external clock to OSC1.
7. When using the E7, set the FROMCKSTP bit in clock halt register 1 to 1.
Related Manuals:
The latest versions of all related manuals are available from our web site.
Please ensure you have the latest versions of all documents you require.
http://www.renesas.com/
H8/38602R Group manuals:
Document Title
H8/38602R Group Hardware Manual
H8/300H Series Software Manual
Document No.
This manual
REJ09B0213
User's manuals for development tools:
Document Title
Document No.
H8S, H8/300 Series C/C++ Compiler, Assembler, Optimizing Linkage Editor REJ10B0058
User's Manual
Microcomputer Development Environment System H8S, H8/300 Series
Simulator/Debugger User's Manual
ADE-702-282
H8S, H8/300 Series High-performance Embedded Workshop 3 Tutorial
REJ10B0024
H8S, H8/300 Series High-performance Embedded Workshop 3 User's Manual REJ10B0026
Rev. 3.00 May 15, 2007 Page vii of xxxii