English
Language : 

HD64F38602R Datasheet, PDF (132/552 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer
Section 6 ROM
6.1 Block Configuration
Figure 6.1 shows the block configuration of flash memory. The thick lines indicate erasing a
block, the narrow lines indicate programming units, and the values are addresses. The 16-Kbyte
flash memory is divided into 1 Kbyte × 4 blocks and 12 Kbytes × 1 block. Erasure is performed in
these units. Programming is performed in 128-byte units starting from an address with lower eight
bits H'00 or H'80.
Erasing unit
1 Kbyte
H'0000
H'0080
H'0001
H'0081
H'0002
H'0082
Erasing unit
1 Kbyte
H'0380
H'0400
H'0480
H'0381
H'0401
H'0481
H'0382
H'0402
H'0482
Erasing unit
1 Kbyte
H'0780
H'0800
H'0880
H'0781
H'0801
H'0881
H'0782
H'0802
H'0882
Erasing unit
1 Kbyte
H'0B80
H'0C00
H'0C80
H'0B81
H'0C01
H'0C81
H'0B82
H'0C02
H'0C82
Erasing unit
12 Kbytes
H'0F80
H'1000
H'1080
H'0F81
H'1001
H'1081
H'0F82
H'1002
H'1082
Programming unit: 128 bytes
Programming unit: 128 bytes
Programming unit: 128 bytes
Programming unit: 128 bytes
Programming unit: 128 bytes
H'007F
H'00FF
H'03FF
H'047F
H'04FF
H'07FF
H'087F
H'08FF
H'0BFF
H'0C7F
H'0CFF
H'0FFF
H'107F
H'10FF
H'3F80 H'3F81 H'3F82
Figure 6.1 Flash Memory Block Configuration
H'3FFF
Rev. 3.00 May 15, 2007 Page 100 of 516
REJ09B0152-0300