SH7619_09 Datasheet, PDF (66/860 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7619 Series

Section 2 CPU
Bit
Read/
Bit
name Default
Write Description
0
T
Undefined R/W T
Indicates true (1) or false (0) in the following
instructions: MOVT, CMP/cond, TAS, TST, BT (BT/S),
BF (BF/S), SETT, CLRT
Indicates carry, borrow, overflow, or underflow in the
following instructions: ADDV, ADDC, SUBV, SUBC,
NEGC, DIV0U, DIV0S, DIV1, SHAR, SHAL, SHLR,
SHLL, ROTR, ROTL, ROTCR, ROTCL
• Global-base register (GBR)
This register indicates a base address in GBR indirect addressing mode. The GBR indirect
addressing mode is used for data transfer of the on-chip peripheral module registers and logic
operations.
• Vector-base register (VBR)
This register indicates the base address of the exception handling vector table.
2.2.3 System Registers
There are four 32-bit system registers, designated two multiply and accumulate registers (MACH
and MACL), a procedure register (PR), and program counter (PC).
• Multiply and accumulate registers (MAC)
This register stores the results of multiplication and multiply-and-accumulate operation.
• Procedure register (PR)
This register stores the return-destination address from subroutine procedures.
• Program counter (PC)
The PC indicates the point which is four bytes (two instructions) after the current execution
instruction.
Rev. 6.00 Jul. 15, 2009 Page 26 of 816
REJ09B0237-0600