SH7619_09 Datasheet, PDF (572/860 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7619 Series

Section 17 Host Interface (HIF)
17.7.3 Consecutive Data Writing to HIFRAM by External Device
Figure 17.6 shows the timing chart for consecutive data transfer from an external device to
HIFRAM. As shown in this timing chart, by setting the start address and the data to be written
first, consecutive data transfer can subsequently be performed.
HIFCS
HIFRS
HIFRD
HIFWR
HIFD15 to HIFD00
High level
0016 AHAL 0018 D0D1 001A D2D3 000A 00A0 0018 D4D5 D6D7 D8D9
HIFADR setting
[15:8] = AH
[7:0] = AL
Data for first write operation
set in HIFDATA
[31:24] = D0, [23:16] = D1,
[15:8] = D2, [7:0] = D3
HIFMCR setting HIFDATA Consecutive data writing
Consecutive write selection
Auto-increment
Figure 17.6 Consecutive Data Writing to HIFRAM
17.7.4 Consecutive Data Reading from HIFRAM to External Device
Figure 17.7 shows the timing chart for consecutive data reading from HIFRAM to an external
device. As this timing chart indicates, by setting the start address, data can subsequently be read
out consecutively.
Rev. 6.00 Jul. 15, 2009 Page 532 of 816
REJ09B0237-0600