SH7619_09 Datasheet, PDF (432/860 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7619 Series

Section 15 Serial Communication Interface with FIFO (SCIF)
Initial
Bit
Bit Name value R/W Description
6
TEND
0
R/(W)* Transmit End
Indicates that when the last bit of a serial character
was transmitted, SCFTDR did not contain valid data,
so transmission has ended.
0: Transmission is in progress
[Clearing conditions]
• TEND is cleared to 0 when 0 is written after 1 is
read from TEND after transmit data is written in
SCFTDR
1: End of transmission
[Setting conditions]
• TEND is set to 1 when the chip is a power-on
reset
• TEND is set to 1 when TE is cleared to 0 in the
serial control register (SCSCR)
• TEND is set to 1 when SCFTDR does not contain
receive data when the last bit of a one-byte serial
character is transmitted
Rev. 6.00 Jul. 15, 2009 Page 392 of 816
REJ09B0237-0600