SH7046 Datasheet, PDF (52/611 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7046 Series

Section 1 Overview
Type
A/D
converter
Symbol
I/O
AN19 to AN8 Input
ADTRG
Input
AVCC
Input
AVSS
Input
I/O ports
PA15 to PA0 Input/
Output
PB5 to PB2 Input/
Output
PE21 to PE0 Input/
Output
PF15 to PF8 Input
PG3 to PG0 Input
User break UBCTRG
controller
(UBC)
(flash
version only)
Output
Name
Function
Analog input Analog input pins.
pins
Input of
Pin for input of an external trigger to start
trigger for A/D A/D conversion
conversion
Analog power
supply
Power supply pin for the A/D converter.
When the A/D converter is not used,
connect this pin to the system power
supply (+5 V). Connect all AVCC pins to
the power supply. The chip does not
operate normally when some of these
pins are open.
Analog
ground
The ground pin for the A/D converter.
Connect this pin to the system power
supply (0 V). Connect all AVSS pins to
the system power supply The chip does
not operate normally when some of these
pins are open.
General
16-bits general purpose input/output pins
purpose port
General
4-bits general purpose input/output pins.
purpose port
General
22-bits general purpose input/output
purpose port pins.
General
8-bits general purpose input pins.
purpose port
General
4-bits general purpose input pins.
purpose port
User break UBC condition match trigger output pin.
trigger output
Rev. 4.00 Dec 05, 2005 page 8 of 564
REJ09B0270-0400