SH7046 Datasheet, PDF (212/611 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7046 Series

Section 10 Multi-Function Timer Pulse Unit (MTU)
Initial
Bit Bit Name value R/W
Description
2
TGFC
0
R/(W) Input Capture/Output Compare Flag C
Status flag that indicates the occurrence of TGRC input
capture or compare match in channels 0, 3, and 4. Only 0
can be written, for flag clearing. In channels 1 and 2, bit 2
is reserved. It is always read as 0, and should only be
written with 0.
[Setting conditions]
• When TCNT = TGRC and TGRC is functioning as
output compare register
• When TCNT value is transferred to TGRC by input
capture signal and TGRC is functioning as input
capture register
[Clearing conditions]
• When DTC is activated by TGIC interrupt and the
DISEL bit of DTMR in DTC is 0
• When 0 is written to TGFC after reading TGFC = 1
1
TGFB
0
R/(W) Input Capture/Output Compare Flag B
Status flag that indicates the occurrence of TGRB input
capture or compare match. Only 0 can be written, for flag
clearing.
[Setting conditions]
• When TCNT = TGRB and TGRB is functioning as
output compare register
• When TCNT value is transferred to TGRB by input
capture signal and TGRB is functioning as input
capture register
[Clearing conditions]
• When DTC is activated by TGIB interrupt and the
DISEL bit of DTMR in DTC is 0
• When 0 is written to TGFB after reading TGFB = 1
Rev. 4.00 Dec 05, 2005 page 168 of 564
REJ09B0270-0400