SH7046 Datasheet, PDF (472/611 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7046 Series

Section 15 Motor Management Timer (MMT)
Initial
Bit Bit Name Value
13
POE5F 0
12
POE4F 0
11 to 9 
All 0
8
PIE
0
7, 6 
All 0
R/W
R/(W)^*
R/(W)^*
R
R/W
R
Description
POE5 Flag
Indicates that a high impedance request has been input to
the POE5 pin.
[Clearing condition]
• When 0 is written to POE5F after reading POE5F = 1
[Setting condition]
• When the input set by bits 2 and 3 of ICSR2 occurs at
the POE5 pin
POE4 Flag
Indicates that a high impedance request has been input to
the POE4 pin.
[Clearing condition]
• When 0 is written to POE4F after reading POE4F = 1
[Setting condition]
• When the input set by bits 0 and 1 of ICSR2 occurs at
the POE4 pin
Reserved
These bits are always read as 0 and should only be
written with 0.
Port Interrupt Enable
Enables or disables an interrupt request when 1 is set in
any of bits POE4F to POE6F in ICSR2.
0: Interrupt request disabled
1: Interrupt request enabled
Reserved
These bits are always read as 0 and should only be
written with 0.
Rev. 4.00 Dec 05, 2005 page 428 of 564
REJ09B0270-0400