SH7046 Datasheet, PDF (210/611 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7046 Series

Section 10 Multi-Function Timer Pulse Unit (MTU)
10.3.5 Timer Status Register (TSR)
The TSR registers are 8-bit readable/writable registers that indicate the status of each channel. The
MTU has five TSR registers, one for each channel.
Initial
Bit Bit Name value R/W
Description
7
TCFD
1
R
Count Direction Flag
Status flag that shows the direction in which TCNT counts
in channels 1, 2, 3, and 4.
In channel 0, bit 7 is reserved. It is always read as 1, and
should only be written with 1.
0: TCNT counts down
1: TCNT counts up
6

1
R
Reserved
This bit is always read as 1, and should only be written
with 1.
5
TCFU
0
R/(W) Underflow Flag
Status flag that indicates that TCNT underflow has
occurred when channels 1 and 2 are set to phase
counting mode. Only 0 can be written, for flag clearing.
In channels 0, 3, and 4, bit 5 is reserved. It is always read
as 0, and should only be written with 0.
[Setting condition]
• When the TCNT value underflows (changes from
H'0000 to H'FFFF)
[Clearing condition]
• When 0 is written to TCFU after reading TCFU = 1
Rev. 4.00 Dec 05, 2005 page 166 of 564
REJ09B0270-0400