MC9S12G Datasheet, PDF (355/1160 Pages) Freescale Semiconductor, Inc – Ignores external trigger. Performs one conversion sequence and stops.

S12 Clock, Reset and Power Management Unit (S12CPMU)
0x02F4
R
W
Reset
7
APIR15
6
APIR14
5
APIR13
4
APIR12
3
APIR11
2
APIR10
1
APIR9
0
0
0
0
0
0
0
= Unimplemented or Reserved
Figure 10-20. Autonomous Periodical Interrupt Rate High Register (CPMUAPIRH)
0
APIR8
0
0x02F5
R
W
Reset
7
APIR7
6
APIR6
5
APIR5
4
APIR4
3
APIR3
2
APIR2
1
APIR1
0
0
0
0
0
0
0
Figure 10-21. Autonomous Periodical Interrupt Rate Low Register (CPMUAPIRL)
0
APIR0
0
Read: Anytime
Write: Anytime if APIFE=0. Else writes have no effect.
Table 10-19. CPMUAPIRH / CPMUAPIRL Field Descriptions
Field
Description
15-0
Autonomous Periodical Interrupt Rate Bits — These bits define the time-out period of the API. See
APIR[15:0] Table 10-20 for details of the effect of the autonomous periodical interrupt rate bits.
The period can be calculated as follows depending on logical value of the APICLK bit:
APICLK=0: Period = 2*(APIR[15:0] + 1) * f_ACLK
APICLK=1: Period = 2*(APIR[15:0] + 1) * Bus Clock period
NOTE
For APICLK bit clear the first time-out period of the API will show a latency
time between two to three f_ACLK cycles due to synchronous clock gate
release when the API feature gets enabled (APIFE bit set).
Table 10-20. Selectable Autonomous Periodical Interrupt Periods
APICLK
0
0
0
0
APIR[15:0]
0000
0001
0002
0003
Selected Period
0.2 ms¹
0.4 ms¹
0.6 ms¹
0.8 ms¹
MC9S12G Family Reference Manual, Rev.1.01
Freescale Semiconductor
355
This document is valid for the S12G96 and the S12G128 device. All information related to other devices is preliminary.