MC9S12G Datasheet, PDF (1083/1160 Pages) Freescale Semiconductor, Inc – Ignores external trigger. Performs one conversion sequence and stops.

Electrical Characteristics
Table A-6. 3.3-V I/O Characteristics
ALL 3.3V RANGE I/O PARAMETERS ARE SUBJECT TO CHANGE FOLLOWING CHARACTERIZATION
Conditions are 3.15 V < V_DD35 < 3.6 V junction temperature from –40°C to +150°C, unless otherwise noted
I/O Characteristics for all I/O pins except EXTAL, XTAL,TEST and supply pins.
Num C
Rating
Symbol
Min
Typ
Max
Unit
16 D Port J, P, AD interrupt input pulse filtered (STOP) in n_{P_MASK}
—
—
3
number of bus clock cycles of period 1/f_bus
17 D Port J, P, AD interrupt input pulse passed (STOP) in n_{P_PASS}
4
—
—
number of bus clock cycles of period 1/f_bus
18 D IRQ pulse width, edge-sensitive mode (STOP) in
n_IRQ
1
—
—
number of bus clock cycles of period 1/f_bus
1 _{Maximum leakage current occurs at maximum operating temperature. Current decreases by approximately one-half for each}
8°C to 12 C° in the temperature range from 50°C to 125°C.
2 _{Refer to Section A.1.4, “Current Injection” for more details}
3 _{Parameter only applies in stop or pseudo stop mode.}
MC9S12G Family Reference Manual, Rev.1.01
Freescale Semiconductor
1083
This document is valid for the S12G96 and the S12G128 device. All information related to other devices is preliminary.