HD6417705 Datasheet, PDF (675/739 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7700 Series

Table 25.2 DC Characteristics (2-c) [USB Transceiver-Related Pins^*1]
(Condition: Ta = –20 to 75°C)
Item
Symbol Min
Typ
Max
Measurement
Unit Conditions
Power supply voltage^*2
VCC-USB 3.0
3.3
3.6
V
Differential input sensitivity VDI
0.2
—
—
V
(DP)–(DM)
Differential common mode VCM
0.8
—
2.5
V
range
Single ended receiver
VSE
0.8
—
2.0
V
threshold voltage
Output high voltage
VOH
2.8
—
VCC-USB V
Output low voltage
VOL
—
—
0.3
V
Tri-state leak current
ILO
–10
—
10
µA 0V<VIN<3.3V
Notes: 1. D+ and D– pins
2. VCC-USB must satisfy the condition: VCCQ ≤ VCC-USB. Even when the USB is not used,
power must be supplied between VCC-USB and VSS-USB.
Table 25.3 Permitted Output Current Values
(Conditions: VCCQ = VCC-RTC = VCC-USB = 3.0 to 3.6 V, VCC = VCC-PLL1 = VCC-PLL2 = 1.4 to
1.6 V, AVCC = 3.0 to 3.6 V, VSSQ = VSS = VSS-RTC = VSS-USB = VSS-PLL1 = VSS-PLL2 =
AVSS = 0 V, Ta = –20 to 75°C)
Item
Symbol
Min Typ Max Unit
Output low-level permissible current (per pin)
Output low-level permissible current (total)
IOL
∑ IOL
—
— 2.0 mA
—
— 120 mA
Output high-level permissible current (per pin)
Output high-level permissible current (total)
–IOH
∑ (–IOH)
—
— 2.0 mA
—
— 40 mA
Caution: To ensure LSI reliability, do not exceed the value for output current given in table 25.3.
Rev. 2.00, 09/03, page 629 of 690