HD6417705 Datasheet, PDF (62/739 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7700 Series

2. The input level of the ASEMD0 pin must be high if the E10A emulator is not used. For
details, refer to section 23.4.2, Reset Configuration.
3. These pins are initialized to the general input port setting in which the pull-up MOS is off
at a power-on reset. When these pins are connected to memory and so on, their levels
must be fixed externally.
4. The initial functions of NF (No Function) pins are not assigned after power-on reset.
Specifies the functions with Pin Function Controller (PFC).
5. In hardware standby mode, supply power to all power supply pins including the RTC
power supply pins.
6. Pull-up MOS connected.
7. The pull-up MOS turns on if the pin function controller (PFC) is used to select other
functions (UDI).
Rev. 2.00, 09/03, page 16 of 690