PIC24FJ64GA705 Datasheet, PDF (368/412 Pages) –

PIC24FJ256GA705 FAMILY
32.2 AC Characteristics and Timing Parameters
The information contained in this section defines the PIC24FJ256GA705 family AC characteristics and timing
parameters.
TABLE 32-16: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
AC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature
-40°C  TA  +85°C for Industrial
Operating voltage VDD range as described in Section 32.1 “DC Characteristics”.
FIGURE 32-2:
LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Load Condition 1 – for all pins except OSCO
Load Condition 2 – for OSCO
VDD/2
RL
Pin
CL
VSS
Pin
CL
VSS
RL = 464
CL = 50 pF for all pins except OSCO
15 pF for OSCO output
TABLE 32-17: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
DO50 COSCO OSCO/CLKO Pin
—
— 15 pF In XT and HS modes when
external clock is used to drive
OSCI
DO56 CIO
DO58 CB
All I/O Pins and OSCO
SCLx, SDAx
—
— 50 pF EC mode
—
— 400 pF In I²C mode
Note 1: Data in the “Typ” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
DS30010118B-page 368
 2016 Microchip Technology Inc.