PIC24FJ64GA705 Datasheet, PDF (360/412 Pages) –

PIC24FJ256GA705 FAMILY
TABLE 32-4: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature
-40°C  TA  +85°C for Industrial
Parameter
No.
Typical⁽¹⁾
Max
Units
Operating
Temperature
VDD
Conditions
Operating Current (IDD)⁽²⁾
DC19
230
365
250
365
A
-40°C to +85°C
A
-40°C to +85°C
2.0V
3.3V
0.5 MIPS,
FOSC = 1 MHz
DC20
430
640
440
640
A
-40°C to +85°C
A
-40°C to +85°C
2.0V
3.3V
1 MIPS,
FOSC = 2 MHz
DC23
1.5
2.4
1.65
2.4
mA
-40°C to +85°C
mA
-40°C to +85°C
2.0V
3.3V
4 MIPS,
FOSC = 8 MHz
DC24
6.1
7.7
6.3
7.7
mA
-40°C to +85°C
mA
-40°C to +85°C
2.0V
3.3V
16 MIPS,
FOSC = 32 MHz
DC31
43
130
46
130
A
-40°C to +85°C
A
-40°C to +85°C
2.0V
3.3V
LPRC (15.5 KIPS),
FOSC = 31 kHz
DC32
1.6
2.5
1.65
2.5
mA
-40°C to +85°C
mA
-40°C to +85°C
2.0V
3.3V
FRC (4 MIPS),
FOSC = 8 MHz
Note 1: Data in the “Typical” column is at 3.3V, +25°C unless otherwise stated. Typical parameters are for design
guidance only and are not tested.
2: The test conditions for all IDD measurements are as follows: OSC1 driven with external square wave from
rail-to-rail. All I/O pins are configured as outputs and driving low. MCLR = VDD; WDT and FSCM are dis-
abled. CPU, program memory and data memory are operational. No peripheral modules are operating or
being clocked (defined PMDx bits are all ‘1’s). JTAG interface is disabled.
DS30010118B-page 360
 2016 Microchip Technology Inc.