PIC24FJ64GA705 Datasheet, PDF (189/412 Pages) –

PIC24FJ256GA705 FAMILY
16.5 Auxiliary Output
The MCCPx modules have an auxiliary (secondary)
output that provides other peripherals access to inter-
nal module signals. The auxiliary output is intended to
connect to other MCCPx modules, or other digital
peripherals, to provide these types of functions:
• Time Base Synchronization
• Peripheral Trigger and Clock Inputs
• Signal Gating
The type of output signal is selected using the
AUXOUT<1:0> control bits (CCPxCON2H<4:3>). The
type of output signal is also dependent on the module
operating mode.
On the PIC24FJ256GA705 family of devices, only the
CTMU discharge trigger has access to the auxiliary
output signal.
TABLE 16-4: AUXILIARY OUTPUT
AUXOUT<1:0> CCSEL MOD<3:0>
Comments
00
x
xxxx Auxiliary Output Disabled
01
0
0000 Time Base Modes
10
11
01
0
0001 Output Compare Modes
10
through
1111
11
01
1
xxxx Input Capture Modes
10
11
Signal Description
No Output
Time Base Period Reset or Rollover
Special Event Trigger Output
No Output
Time Base Period Reset or Rollover
Output Compare Event Signal
Output Compare Signal
Time Base Period Reset or Rollover
Reflects the Value of the ICDIS bit
Input Capture Event Signal
 2016 Microchip Technology Inc.
DS30010118B-page 189