EZ80F91MCU Datasheet, PDF (159/396 Pages) Zilog, Inc. – eZ80Acclaim-TM Flash Microcontrollers

eZ80F91 MCU
Product Specification
140
5
0
IRQ_OC2_EN
1
4
0
IRQ_OC1_EN
1
3
0
IRQ_OC0_EN
1
2
0
IRQ_ICB_EN
1
1
0
IRQ_ICA_EN
1
0
0
IRQ_EOC_EN ₁
Interrupt requests for OC2 are disabled (valid only in
OUTPUT COMPARE mode). OC operations occur in Timer
3.
Interrupt requests for OC2 are enabled (valid only in
OUTPUT COMPARE mode). OC operations occur in Timer
3.
Interrupt requests for OC1 are disabled (valid only in
OUTPUT COMPARE mode). OC operations occur in Timer
3.
Interrupt requests for OC1 are enabled (valid only in
OUTPUT COMPARE mode). OC operations occur in Timer
3.
Interrupt requests for OC0 are disabled (valid only in
OUTPUT COMPARE mode). OC operations occur in Timer
3.
Interrupt requests for OC0 are enabled (valid only in
OUTPUT COMPARE mode). OC operations occur in Timer
3.
Interrupt requests for ICx are disabled (valid only in INPUT
CAPTURE mode).
Timer 1: the capture pin is IC1.
Timer 3: the capture pin is IC3.
Interrupt requests for ICx are enabled (valid only in INPUT
CAPTURE mode).
For Timer 1: the capture pin is IC1.
For Timer 3: the capture pin is IC3.
Interrupt requests for ICA or PWM power trip are disabled
(valid only in INPUT CAPTURE and PWM modes).
For Timer 1: the capture pin is IC0.
For Timer 3: the capture pin is IC2.
Interrupt requests for ICA or PWM power trip are enabled
(valid only in INPUT CAPTURE and PWM modes).
For Timer 1: the capture pin is IC0.
For Timer 3: the capture pin is IC2.
Interrupt on end-of-count is disabled.
Interrupt on end-of-count is enabled.
PS019209-0504
PRELIMINARY
Programmable Reload Timers