English
Language : 

HD64F3437TF16 Datasheet, PDF (596/752 Pages) Hitachi Semiconductor – 12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device.
H8/3437
VCC
600 Ω
Ports 1 or 2
LED
Figure 23.2 Example of Circuit for Driving an LED (5-V Version)
Table 23.7 Bus Drive Characteristics
Conditions: VCC = 2.7 V to 5.5 V*, VSS = 0 V, Ta = –20˚C to +75°C
Item
Symbol Min Typ Max Unit Test Condition
Output low SCL, SDA
VOL
level voltage PA4 to PA7
(bus drive
selection)
—
—
0.5
V
VCCB = 5 V ±10%
IOL = 16 mA
—
—
0.5
VCCB = 2.7 V to 5.5 V*
IOL = 8 mA
—
—
0.4
VCCB = 2.7 V to 5.5 V*
IOL = 3 mA
Note: * In the F-ZTAT LH version, VCC = 3.0 V to 5.5 V, VCCB = 3.0 V to 5.5 V.
23.2.2 AC Characteristics
The AC characteristics are listed in four tables. Bus timing parameters are given in table 23.8,
control signal timing parameters in table 23.9, timing parameters of the on-chip supporting
modules in table 23.10, I2C bus timing parameters in table 23.11, and external clock output
stabilization delay time in table 23.12.
567