HD64F3437TF16 Datasheet, PDF (364/752 Pages) Hitachi Semiconductor – 12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device.

Section 15 A/D Converter
15.1 Overview
The H8/3437 Series includes a 10-bit successive-approximations A/D converter with a selection of
up to eight analog input channels.
15.1.1 Features
A/D converter features are listed below.
• 10-bit resolution
• Eight input channels
• Selectable analog conversion voltage range
The analog voltage conversion range can be programmed by input of an analog reference
voltage at the AV_ref pin.
• High-speed conversion
Conversion time: minimum 8.4 µs per channel (with 16-MHz system clock)
• Two conversion modes
Single mode: A/D conversion of one channel
Scan mode: continuous conversion on one to four channels
• Four 16-bit data registers
A/D conversion results are transferred for storage into data registers corresponding to the
channels.
• Sample-and-hold function
• A/D conversion can be externally triggered
• A/D interrupt requested at end of conversion
At the end of A/D conversion, an A/D end interrupt (ADI) can be requested.
335