HD64F3437TF16 Datasheet, PDF (543/752 Pages) Hitachi Semiconductor – 12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device.

board update routine area, and the on-board update routine execution state is entered (flash
memory programming is performed).
Therefore, a routine conforming to the programming algorithm described later must be provided in
the on-board update routine transferred from the host.
Figure 21.6 shows the system configuration in boot mode, and figure 21.7 shows the boot mode
execution procedure.
H8/3437SF
Host
Flash memory
Reception of programming data
Transmission of verification data
RxD1
SCI1
TxD1
On-chip RAM
Figure 21.6 Boot-Mode System Configuration
Boot-Mode Execution Procedure: Figure 21.7 shows the boot-mode execution procedure.
514