|
HD64F3437TF16 Datasheet, PDF (31/752 Pages) Hitachi Semiconductor – 12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. | |||
|
◁ |
Table 1.1 Features
Item
CPU
Memory
16-bit free-running
timer (1 channel)
8-bit timer
(2 channels)
PWM timer
(2 channels)
Watchdog timer
(WDT) (1 channel)
Specification
Two-way general register configuration
⢠Eight 16-bit registers, or
⢠Sixteen 8-bit registers
High-speed operation
⢠Maximum clock rate (ø clock): 16 MHz at 5 V, 12 MHz at 4 V or 10 MHz
at 3 V
⢠8- or 16-bit register-register add/subtract: 125 ns (16 MHz), 167 ns
(12 MHz), 200 ns (10 MHz)
⢠8 à 8-bit multiply: 875 ns (16 MHz), 1167 ns (12 MHz), 1400 ns (10 MHz)
⢠16 ÷ 8-bit divide: 875 ns (16 MHz), 1167 ns (12 MHz), 1400 ns (10 MHz)
Streamlined, concise instruction set
⢠Instruction length: 2 or 4 bytes
⢠Register-register arithmetic and logic operations
⢠MOV instruction for data transfer between registers and memory
Instruction set features
⢠Multiply instruction (8 bits à 8 bits)
⢠Divide instruction (16 bits ÷ 8 bits)
⢠Bit-accumulator instructions
⢠Register-indirect specification of bit positions
⢠H8/3437: 60-kbyte ROM; 2-kbyte RAM
⢠H8/3436: 48-kbyte ROM; 2-kbyte RAM
⢠H8/3434: 32-kbyte ROM; 1-kbyte RAM
⢠One 16-bit free-running counter (can also count external events)
⢠Two output-compare lines
⢠Four input capture lines (can be buffered)
Each channel has
⢠One 8-bit up-counter (can also count external events)
⢠Two time constant registers
⢠Duty cycle can be set from 0 to 100%
⢠Resolution: 1/250
⢠Overflow can generate a reset or NMI interrupt
⢠Also usable as interval timer
2
|
▷ |