C8051F960-B-GM Datasheet, PDF (420/492 Pages) Silicon Laboratories – Ultra Low Power 128K, LCD MCU Family

C8051F96x
SFR Definition 30.3. SPI0CKR: SPI0 Clock Rate
Bit
7
6
5
4
3
2
1
0
Name
SCR[7:0]
Type
R/W
Reset
0
0
0
0
0
0
0
0
SFR Page = 0x0; SFR Address = 0xA2
Bit
Name
Function
7:0 SCR[7:0] SPI0 Clock Rate.
These bits determine the frequency of the SCK output when the SPI0 module is
configured for master mode operation. The SCK clock frequency is a divided ver-
sion of the system clock, and is given in the following equation, where SYSCLK is
the system clock frequency and SPI0CKR is the 8-bit value held in the SPI0CKR
register.
f_SCK = _2----------_--S----P---SI--0-Y--C--S--K--C--R--L--[-K-7---:--0---]---+-----1----_
for 0 <= SPI0CKR <= 255
Example: If SYSCLK = 2 MHz and SPI0CKR = 0x04,
f_SCK = _{2---2--}-0---0-_--40---0--+-0---0-1---_
f_SCK = 200kHz
SFR Definition 30.4. SPI0DAT: SPI0 Data
Bit
7
6
5
4
3
2
1
0
Name
SPI0DAT[7:0]
Type
R/W
Reset
0
0
0
0
0
0
0
0
SFR Page = 0x0; SFR Address = 0xA3
Bit
Name
Function
7:0 SPI0DAT[7:0] SPI0 Transmit and Receive Data.
The SPI0DAT register is used to transmit and receive SPI0 data. Writing data to
SPI0DAT places the data into the transmit buffer and initiates a transfer when in
Master Mode. A read of SPI0DAT returns the contents of the receive buffer.
420
Rev. 1.0