|
C8051F960-B-GM Datasheet, PDF (293/492 Pages) Silicon Laboratories – Ultra Low Power 128K, LCD MCU Family | |||
|
◁ |
C8051F96x
SFR Definition 23.3. OSCICL: Internal Oscillator Calibration
Bit
7
6
5
Name
Type
Reset
SSE
R/W
0
R/W
Varies
R/W
Varies
SFR Page = 0x0; SFR Address = 0xB3
4
3
2
R/W
OSCICL[6:0]
R/W
R/W
Varies
Varies
Varies
1
R/W
Varies
0
R/W
Varies
Bit Name
Function
7
SSE Spread Spectrum Enable.
0: Spread Spectrum clock dithering disabled.
1: Spread Spectrum clock dithering enabled.
6:0 OSCICL Internal Oscillator Calibration.
Factory calibrated to obtain a frequency of 24.5 MHz. Incrementing this register
decreases the oscillator frequency and decrementing this register increases the
oscillator frequency. The step size is approximately 1% of the calibrated frequency.
The recommended calibration frequency range is between 16 and 24.5 MHz.
Note: If the Precision Internal Oscillator is selected as the system clock, the following procedure should be used
when changing the value of the internal oscillator calibration bits.ï
1. Switch to a different clock source.ï
2. Disable the oscillator by writing OSCICN.7 to 0.ï
3. Change OSCICL to the desired setting.ï
4. Enable the oscillator by writing OSCICN.7 to 1.
Rev. 1.0
293
|
▷ |