|
Z8F1680SH020SG Datasheet, PDF (332/412 Pages) Zilog, Inc. – High-Performance 8-Bit Microcontrollers | |||
|
◁ |
Z8 Encore! XP® F1680 Series
Product Specification
307
DBG â Size[7:0]ï
DBG â 1-256 data bytes
Write Program Memory (0AH). The Write Program Memory command writes data to
Program memory. This command is equivalent to the LDC and LDCI instructions. Data
can be written 1â65536 bytes at a time (65536 bytes can be written by setting size to 0).
The on-chip Flash Controller must be written and unlocked for the programming operation
to occur. If the Flash Controller is not unlocked, the data is discarded. If the device is not
in DEBUG mode or if the Read Protect option bit is enabled, the data is discarded.
DBG â 0AHï
DBG â Program Memory Address[15:8]ï
DBG â Program Memory Address[7:0]ï
DBG â Size[15:8]ï
DBG â Size[7:0]ï
DBG â 1-65536 data bytes
Read Program Memory (0BH). The Read Program Memory command reads data from
Program memory. This command is equivalent to the LDC and LDCI instructions. Data
can be read 1â65536 bytes at a time (65536 bytes can be read by setting size to 0). If the
device is not in DEBUG mode or if the Read Protect option bit is enabled, this command
returns FFH for the data.
DBG â 0BHï
DBG â Program Memory Address[15:8]ï
DBG â Program Memory Address[7:0]ï
DBG â Size[15:8]ï
DBG â Size[7:0]ï
DBG â 1-65536 data bytes
Write Data Memory (0CH). The Write Data Memory command writes data to Data Mem-
ory. This command is equivalent to the LDE and LDEI instructions. Data is written 1â
65536 bytes at a time (65536 bytes can be written by setting size to 0). If the device is not
in DEBUG mode or if the Read Protect option bit is enabled, the data is discarded.
DBG â 0CHï
DBG â Data Memory Address[15:8]ï
DBG â Data Memory Address[7:0]ï
DBG â Size[15:8]ï
DBG â Size[7:0]ï
DBG â 1-65536 data bytes
Read Data Memory (0DH). The Read Data Memory command reads from Data Memory.
This command is equivalent to the LDE and LDEI instructions. Data can be read 1 to
65536 bytes at a time (65536 bytes can be read by setting size to 0). If the device is not in
DEBUG mode, this command returns FFH for the data.
DBG â 0DHï
DBG â Data Memory Address[15:8]ï
DBG â Data Memory Address[7:0]ï
DBG â Size[15:8]ï
PS025015-1212
PRELIMINARY
On-Chip Debugger
|
▷ |