SH7020 Datasheet, PDF (382/509 Pages) Renesas Technology Corp – SuperH™ RISC engine

Transmit/Receive Formats: Table 13.10 shows the 12 communication formats that can be
selected in the asynchronous mode. The format is selected by settings in the serial mode register
(SMR).
Table 13.10 Serial Communication Formats (asynchronous mode)
SMR Bits
CHR PE MP STOP 1 2 3 4 5 6 7 8 9
10 11 12
0 00 0
START
8-Bit data
STOP
0 00 1
START
8-Bit data
STOP STOP
0 10 0
START
8-Bit data
P STOP
0 10 1
START
8-Bit data
P STOP STOP
1 00 0
START
7-Bit data
STOP
1 00 1
START
7-Bit data
STOP STOP
1 10 0
START
7-Bit data
P STOP
1 10 1
START
7-Bit data
P STOP STOP
0 —1 0
START
8-Bit data
MPB STOP
0 —1 1
START
8-Bit data
MPB STOP STOP
1 —1 0
START
7-Bit data
MPB STOP
1 —1 1
START
—: Don't care bits.
Note: START: Start bit
STOP: Stop bit
P: Parity bit
MPB: Multiprocessor bit
7-Bit data
MPB STOP STOP
Clock: An internal clock generated by the on-chip baud rate generator or an external clock input
from the SCK pin can be selected as the SCI transmit/receive clock. The clock source is selected
by the C/A bit in the serial mode register (SMR) and bits CKE1 and CKE0 in the serial control
register (SCR) (table 13.9).
When an external clock is input at the SCK pin, it must have a frequency equal to 16 times the
RENESAS 367