SH7020 Datasheet, PDF (193/509 Pages) Renesas Technology Corp – SuperH™ RISC engine

• Bits 15 and 14 (destination address mode bits 1, 0 (DM1 and DM0)): DM1 and DM0 select
whether the DMA destination address is incremented, decremented, or left fixed (in the single
address mode, DM1 and DM0 are ignored when transfers are made from memory-mapped
external devices or external memory to external devices with DACK). DM1 and DM0 are
initialized to 00 by resets or in standby mode.
Bit 15: DM1
0
0
1
1
Bit 14: DM0
0
1
0
1
Description
Fixed destination address (initial value)
Destination address is incremented (+1 or +2 depending on if
the transfer size is word or byte)
Destination address is decremented (–1 or –2 depending on if
the transfer size is word or byte)
Reserved (illegal setting)
• Bits 13 and 12 (source address mode bits 1, 0 (SM1 and SM0)): SM1 and SM0 select whether
the DMA source address is incremented, decremented, or left fixed (in the single address
mode, SM1 and SM0 are ignored when transfers are made from external devices with DACK
to memory-mapped external devices or external memory). SM1 and SM0 are initialized to 00
by resets or in standby mode.
Bit 13: SM1
0
0
1
1
Bit 12: SM0
0
1
0
1
Description
Fixed source address (initial value)
Source address is incremented (+1 or +2 depending on if the
transfer size is word or byte)
Source address is decremented (–1 or –2 depending on if the
transfer size is word or byte)
Reserved (illegal setting)
• Bits 11–8 (resource select bits 3–0 (RS3-RS0)): RS3–RS0 specify which transfer requests will
be sent to the DMAC. Do not change the transfer request source unless the DMA enable bit
(DE) is 0. The RS3–RS0 bits are initialized to 0000 by resets or in standby mode.
176 RENESAS