SH7125_08 Datasheet, PDF (620/774 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 17 Flash Memory
Initial
Bit
Bit Name Value
R/W
31 to 0 MOA31 to Undefined R/W
MOA0
Description
MOA31 to MOA0
Store the start address of the programming destination
on the user MAT. The consecutive 128-byte
programming is executed starting from the specified
start address of the user MAT. The MOA6 to MOA0 bits
are always 0 because the start address of the
programming destination is at the 128-byte boundary.
(3.2) Flash multipurpose data destination area parameter (FMPDR: general register R4 of CPU)
This parameter indicates the start address in the area which stores the data to be programmed
in the user MAT. When the storage destination of the program data is in flash memory, an
error occurs. The error occurrence is indicated by the WD bit (bit 2) in FPFR.
Bit: 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MOD31 MOD30 MOD29 MOD28 MOD27 MOD26 MOD25 MOD24 MOD23 MOD22 MOD21 MOD20 MOD19 MOD18 MOD17 MOD16
Initial value: -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
MOD15 MOD14 MOD13 MOD12 MOD11 MOD10 MOD9 MOD8 MOD7 MOD6 MOD5 MOD4 MOD3 MOD2 MOD1 MOD0
Initial value: -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Initial
Bit
Bit Name Value
R/W
31 to 0 MOD31 to Undefined R/W
MOD0
Description
MOD31 to MOD0
Store the start address of the area which stores the
program data for the user MAT. The consecutive 128-
byte data is programmed to the user MAT starting from
the specified start address.
Rev. 4.00 Jul. 25, 2008 Page 600 of 750
REJ09B0243-0400