SH7125_08 Datasheet, PDF (336/774 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 9 Multi-Function Timer Pulse Unit 2 (MTU2)
9.5 Interrupt Sources
9.5.1 Interrupt Sources and Priorities
There are three kinds of MTU2 interrupt source; TGR input capture/compare match, TCNT
overflow, and TCNT underflow. Each interrupt source has its own status flag and enable/disabled
bit, allowing the generation of interrupt request signals to be enabled or disabled individually.
When an interrupt request is generated, the corresponding status flag in TSR is set to 1. If the
corresponding enable/disable bit in TIER is set to 1 at this time, an interrupt is requested. The
interrupt request is cleared by clearing the status flag to 0.
Relative channel priorities can be changed by the interrupt controller, however the priority order
within a channel is fixed. For details, see section 6, Interrupt Controller (INTC).
Table 9.57 lists the MTU2 interrupt sources.
Rev. 4.00 Jul. 25, 2008 Page 316 of 750
REJ09B0243-0400