English
Language : 

SH7125_08 Datasheet, PDF (35/774 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family
Section 1 Overview
Classification
Symbol
I/O Name
Function
E10A interface
ASEMD0
I
ASE mode
Sets the ASE mode.
When a low level is input, this LSI
enters ASE mode. When a high level
is input, this LSI enters the normal
mode. The emulator functions are
available in ASE mode. When no
signal is input, this pin is pulled up
inside this LSI.
ASEBRK
I
Break request E10A emulator break input pin
ASEBRKAK O
Break mode
acknowledge
Indicates that the E10A emulator has
entered its break mode.
Note: The WDTOVF pin should not be pulled down. When absolutely necessary, pull it down
through a resistor of 1 MΩ or larger.
Rev. 4.00 Jul. 25, 2008 Page 15 of 750
REJ09B0243-0400