HD6473032F16 Datasheet, PDF (630/847 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

Section 18 ROM
Table 18.12 H8/3052BF Socket Adapter Product Codes
Product Code
HD64F3052BF
HD64F3052BTE
HD64F3052BF
HD64F3052BTE
Package
100-pin QFP
(FP-100B)
100-pin TQFP
(TFP-100B)
100-pin QFP
(FP-100B)
100-pin TQFP
(TFP-100B)
Socket Adapter Product Code
ME3064ESHF1H
ME3064ESNF1H
HF306BQ100D4001
HF306BT100D4001
Manufacturer
Minato Electronics
Data IO Japan
Figure 18.17 shows the memory map in PROM mode.
MCU mode
H'000000
H8/3052BF
On-chip ROM
PROM mode
H'00000
H'07FFFF
H'7FFFF
Figure 18.17 Memory Map in PROM Mode
18.10.2 Notes on Use of PROM Mode
1. A write to a 128-byte programming unit in PROM mode should be performed once only.
Erasing must be carried out before reprogramming an address that has already been
programmed.
2. When using a PROM writer to reprogram a device on which on-board programming/erasing
has been performed, it is recommended that erasing be carried out before executing
programming.
3. The memory is initially in the erased state when the device is shipped by Renesas. For
samples for which the erasure history is unknown, it is recommended that erasing be executed
to check and correct the initialization (erase) level.
4. The H8/3052BF does not support a product identification mode as used with general-purpose
EPROMs, and therefore the device name cannot be set automatically in the PROM writer.
Rev. 3.00 Mar 21, 2006 page 600 of 814
REJ09B0302-0300