HD6473032F16 Datasheet, PDF (13/847 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

Item
Page
Revisions (See Manual for Details)
20.4.3 Selection of
625
Waiting Time for Exit from
Software Standby Mode
Table 20.3 Clock
Frequency and Waiting
Time for Clock to Settle
Table amended
Waiting
DIV1 DIV0 STS2 STS1 STS0 Time 18 MHz 16 MHz 12 MHz 10 MHz 8 MHz 6 MHz 4 MHz
0 1 0 0 0 8192 0.91 1.02 1.4
1.6
2.0 2.7 4.1
states
Section 21 Electrical
Characteristics
631 to 658 “Preliminary” deleted
21.1 Absolute Maximum 631
Ratings
Table 21.1 Absolute
Maximum Ratings
21.2.1 DC
Characteristics
Table and note amended
Item
Symbol Value
Unit
Power supply voltage
VCC
–0.3 to +7.0
V
Programming voltage HD64F3052B Vin
–0.3 to VCC + 0.3
V
(FWE)
Analog power supply voltage
AVCC
–0.3 to +7.0
V
Notes: Connect an external capacitor to the VCL pin. Connect an external capacitor between this
pin and ground.
Deleted
Table 21.2 (2) DC
Characteristics
Table 21.3 Permissible 634
Output Currents
Conditions amended
Conditions: VCC = 5.0 V ±10%, AVCC = 5.0 V ±10%, VREF =
4.5 V to AVCC, VSS = AVSS = 0 V, Ta = –20°C to
+75°C
21.2.2 AC Characteristics 636, 637 Condition A, Condition B, and note deleted
Table 21.4 Bus Timing
Table 21.5 Refresh
637
Controller Bus Timing
Condition A, Condition B, and note deleted
Table 21.6 Control Signal 638
Timing
Condition A and Condition B deleted
Table and notes amended
Item
Interrupt pulse width
(NMI, IRQ2 to IRQ0 when exiting
software standby mode)
Rev. 3.00 Mar 21, 2006 page xi of xxviii