HD6473032F16 Datasheet, PDF (578/847 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

Section 16 D/A Converter
16.2.3 D/A Standby Control Register (DASTCR)
DASTCR is an 8-bit readable/writable register that enables or disables D/A output in software
standby mode.
Bit
7
6
5
4
3
2
1
0
—
—
—
—
—
—
— DASTE
Initial value
1
1
1
1
1
1
1
0
Read/Write
—
—
—
—
—
—
—
R/W
Reserved bits
D/A standby enable
Enables or disables D/A output
in software standby mode
DASTCR is initialized to H'FE by a reset and in hardware standby mode. It is not initialized in
software standby mode.
Bits 7 to 1—Reserved: Read-only bits, always read as 1.
Bit 0—D/A Standby Enable (DASTE): Enables or disables D/A output in software standby
mode.
Bit 0: DASTE
0
1
Description
D/A output is disabled in software standby mode
D/A output is enabled in software standby mode
(Initial value)
Rev. 3.00 Mar 21, 2006 page 548 of 814
REJ09B0302-0300