HD6473032F16 Datasheet, PDF (325/847 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

9.12.2 Register Configuration
Table 9.20 summarizes the registers of port B.
Table 9.20 Port B Registers
Address^* Name
H'FFD4
Port B data direction register
H'FFD6
Port B data register
Note: * Lower 16 bits of the address.
Section 9 I/O Ports
Abbreviation R/W
PBDDR
W
PBDR
R/W
Initial Value
H'00
H'00
Port B Data Direction Register (PBDDR)
PBDDR is an 8-bit write-only register that can select input or output for each pin in port B. When
pins are used for TPC output, the corresponding PBDDR bits must also be set.
Bit
Initial value
Read/Write
7
6
5
4
3
2
1
0
PB₇ DDR PB₆ DDR PB₅ DDR PB₄ DDR PB₃ DDR PB₂ DDR PB₁ DDR PB₀ DDR
0
0
0
0
0
0
0
0
W
W
W
W
W
W
W
W
Port B data direction 7 to 0
These bits select input or output for port B pins
A pin in port B becomes an output pin if the corresponding PBDDR bit is set to 1, and an input pin
if this bit is cleared to 0.
PBDDR is a write-only register. Its value cannot be read. All bits return 1 when read.
PBDDR is initialized to H'00 by a reset and in hardware standby mode. In software standby mode
it retains its previous setting. If a PBDDR bit is set to 1, the corresponding pin maintains its output
state in software standby mode.
Rev. 3.00 Mar 21, 2006 page 295 of 814
REJ09B0302-0300