HD6473032F16 Datasheet, PDF (352/847 Pages) Renesas Technology Corp – Hardware Manual Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

Section 10 16-Bit Integrated Timer Unit (ITU)
Before selecting reset-synchronized PWM mode or complementary PWM mode, halt the timer
counter or counters that will be used in these modes.
When these bits select complementary PWM mode or reset-synchronized PWM mode, they take
precedence over the setting of the PWM mode bits (PWM4 and PWM3) in TMDR. Settings of
timer sync bits SYNC4 and SYNC3 in TSNC are valid in complementary PWM mode and reset-
synchronized PWM mode, however. When complementary PWM mode is selected, channels 3
and 4 must not be synchronized (do not set bits SYNC3 and SYNC4 both to 1 in TSNC).
Bit 3—Buffer Mode B4 (BFB4): Selects whether GRB4 operates normally in channel 4, or
whether GRB4 is buffered by BRB4.
Bit 3: BFB4
0
1
Description
GRB4 operates normally
GRB4 is buffered by BRB4
(Initial value)
Bit 2—Buffer Mode A4 (BFA4): Selects whether GRA4 operates normally in channel 4, or
whether GRA4 is buffered by BRA4.
Bit 2: BFA4
0
1
Description
GRA4 operates normally
GRA4 is buffered by BRA4
(Initial value)
Bit 1—Buffer Mode B3 (BFB3): Selects whether GRB3 operates normally in channel 3, or
whether GRB3 is buffered by BRB3.
Bit 1: BFB3
0
1
Description
GRB3 operates normally
GRB3 is buffered by BRB3
(Initial value)
Bit 0—Buffer Mode A3 (BFA3): Selects whether GRA3 operates normally in channel 3, or
whether GRA3 is buffered by BRA3.
Bit 0: BFA3
0
1
Description
GRA3 operates normally
GRA3 is buffered by BRA3
(Initial value)
Rev. 3.00 Mar 21, 2006 page 322 of 814
REJ09B0302-0300