English
Language : 

SH7147 Datasheet, PDF (835/1108 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family
Section 20 Flash Memory
20.4.2 Programming/Erasing Interface Registers
The programming/erasing interface registers are as described below. They are all 8-bit registers
that can be accessed in bytes.
(1) Flash Code Control and Status Register (FCCS)
FCCS is configured by bits which request the monitor of the FWE pin state and error occurrence
during programming or erasing flash memory and the download of the on-chip program.
Bit: 7
6
5
4
3
2
1
0
FWE MAT
- FLER -
-
-
SCO
Initial value: 1/0 1/0 0
0
0
0
0
0
R/W: R
R
R
R
R
R
R (R)/W
Initial
Bit
Bit Name Value
R/W Description
7
FWE
1/0
R
Flash Programming Enable
Monitors the level which is input to the FWE pin that
performs hardware protection of the flash memory
programming or erasing. The initial value is 0 or 1
according to the FWE pin state.
0: When the FWE pin goes low (in hardware protection
state)
1: When the FWE pin goes high
6
MAT
1/0
R
MAT Bit
Indicates whether the user MAT or user boot MAT is
selected.
0: User MAT is selected
1: User boot MAT is selected
5
⎯
0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
Rev. 3.00 Oct. 06, 2008 Page 811 of 1080
REJ09B0230-0300