English
Language : 

SH7147 Datasheet, PDF (1083/1108 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family
Section 25 Electrical Characteristics
25.6 Usage Note
25.6.1 Notes on Connecting VCL Capacitor
This LSI includes an internal step-down circuit to automatically reduce the internal power supply
voltage to an appropriate level. Between this internal stepped-down power supply (VCL pin) and
the VSS pin, a capacitor (0.47 μF) for stabilizing the internal voltage needs to be connected.
Connection of the external capacitor is shown in figure 25.35. The external capacitor should be
located near the pin. Do not apply any power supply voltage to the VCL pin.
Externally connected capacitors
for power-supply stabilization
VCL
One 0.47-µF
capacitor
VSS
VCL
One 0.47-µF
capacitor
VSS
Note: Do not apply any power supply voltage to the VCL pin.
Use multilayer ceramic capacitors (one 0.47-µF capacitor
for each VCL pin), which should be located near the pin.
Figure 25.35 Connection of VCL Capacitor
Rev. 3.00 Oct. 06, 2008 Page 1059 of 1080
REJ09B0230-0300