SH7147 Datasheet, PDF (313/1108 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 10 Multi-Function Timer Pulse Unit 2 (MTU2) and Multi-Function Timer Pulse Unit 2S (MTU2S)
Initial
Bit
Bit Name Value R/W Description
2
TGFC
0
R/(W)*¹ Input Capture/Output Compare Flag C
Status flag that indicates the occurrence of TGRC input
capture or compare match in channels 0, 3, and 4. Only
0 can be written, for flag clearing. In channels 1 and 2,
bit 2 is reserved. It is always read as 0 and the write
value should always be 0.
[Setting conditions]
• When TCNT = TGRC and TGRC is functioning as
output compare register
• When TCNT value is transferred to TGRC by input
capture signal and TGRC is functioning as input
capture register
[Clearing conditions]
• When DTC is activated by TGIC interrupt and the
DISEL bit of MRB in DTC is 0
• When 0 is written to TGFC after reading TGFC = 1*²
1
TGFB
0
R/(W)*¹ Input Capture/Output Compare Flag B
Status flag that indicates the occurrence of TGRB input
capture or compare match. Only 0 can be written, for flag
clearing.
[Setting conditions]
• When TCNT = TGRB and TGRB is functioning as
output compare register
• When TCNT value is transferred to TGRB by input
capture signal and TGRB is functioning as input
capture register
[Clearing conditions]
• When DTC is activated by TGIB interrupt and the
DISEL bit of MRB in DTC is 0
• When 0 is written to TGFB after reading TGFB = 1*²
Rev. 3.00 Oct. 06, 2008 Page 289 of 1080
REJ09B0230-0300